Pilot-Operated Locking Valves

In the event of a drop in pressure or a total loss of pressure. The valve locks air in the device until the pilot signal is energized.

• Holding position.
• Leak testing.
• Backup safety.
• Avoid equipment crashes with flow control option.

Dual Pilot-Operated Locking Valves

Dual locking valves lock air in two directions, to prevent bounce and runaway cylinders. Locking air on both sides of the cylinder piston results in better control when stopping. No external pilot lines.

• Holding position.
• Less bounce.
• Avoid equipment crashes with flow control option.
• Leak testing.

Counter Balance Valves

The counter balance valve will hold a load in position until pressure or an external force is applied to move the load. Turning the adjusting screw clockwise will increase the load carrying capacity of the valve.

• Holding position.
• Prevent runaway loads.
• Pneumatic resistor.

Vacuum Blow-Off Valves

Vacuum is applied to the vacuum port in order to pick up a part. Pressure is applied to eject the part from the vacuum cup. The internal check maintains vacuum when the supply is removed.

• Holding vacuum without a continuous vacuum source.
• Pick and place.

Normally Open Valves

Normally open valve that closes when pressure is applied to the pilot port. To open the valve, release the pilot pressure. Internal check allows free flow from input to output.

• Leak testing.
• Quick lock.
• Specialty jobs for direct mounting.

Coils, Connectors & Kits

24 vdc coils, coil connectors and valve rebuild kits.

Cartridges for OEM Manifolds

Cartridges for custom OEM manifolds, for holding position in the event of a pressure drop or a total loss of pressure.

• High flow.
• .000113 cc/min Leak rate.
• Inserts from one side.
• Easy installation.